The Best Antenna Analyzer – 2022

After hours of researching and comparing all models on the market, we find out the Best Antenna Analyzer of 2022. Check our ranking below.

Our Picks For The Top Antenna Analyzer


Bestseller No. 1
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
  • [2022 UPGRADED HW V3.6] NEW HW VERSION: V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Added a case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
  • [IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
  • [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software
  • [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
  • Package include NanoVNA host (with battery) display: 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
SaleBestseller No. 2
MFJ-259D MFJ259D Original MFJ Enterprises Antenna Analyzer, VHF/220 MHz (100-160 KHz, 280-520 KHz, .53-230 MHz) - Replaces MFJ-259C
  • ame great performance as the popular MFJ-259C, but with two additional frequency ranges (100-160KHz and 280-520KHz)
  • Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information. Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and Complex Impedance are displayed instantly!
  • Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D (not included)
  • Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll know exactly what to do by simply watching the display.
  • Complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and much more! (1 Year Manufacturer Warranty Included)
SaleBestseller No. 3
AURSINC NanoVNA SAA-2N V2.2 Vector Network Analyzer 50KHz-3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Duplexer, Voltage Standing Wave Ratio, Phase, Delay
  • ✔️Upgraded Version: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier
  • ✔️ 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specifications,please refer to below path to get the firmware updated: drive. google .com/drive/folders/1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj
  • ✔️The SAA-2N/NanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device
  • ✔️Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz); Flip Display, you can flip the display for your convenience usage
  • ✔️ NOTE: The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection: the device can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files
Bestseller No. 4
Rig Expert AA-230 Zoom 100kHz-230MHz Antenna Analyzer
  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable fault location and Measuring capacitance or inductance of reactive loads
Bestseller No. 5
Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
  • 😊【2022 UPGRADED NANOVNA ANALYZER】: SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
  • 😊【BUILT-IN MICRO-SD PORT & TIME DISPLAY】: The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
  • 😊【IMPROVED FREQUENCY ALGORITHM】:The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
  • 😊【PC CONNECTION & TX/RX FUNCTION】:The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
  • 🎁【Abundant Accessories】:Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the nanovna-h4 can be updated by the user. New versions of the firmware needed pls contact us for download link.
Bestseller No. 6
Rig Expert Antenna Analyzer Mini-Manual by Nifty Accessories
  • Condensed antenna analyzer set-up and operating instruction manual simplifies analyzer operation
  • Provides clear descriptions for all controls, setup menus and modes of operation
  • Simple step-by-step instructions, augmented with useful hints and explanations
  • Smaller, faster and easier to use than the factory instruction manual
  • Laminated pages for durability and water resistance
Bestseller No. 7
LibreVNA Portable NanoVNA Vector Network Analyzer- AURSINC Antenna Analyzer 100KHz-6GHz Measuring S Parameters|External Reference Input&Output|USB Based Type C Full Dual Port Interface
  • [FAQ] Some customers mentioned that there is no individual heatsink for LibreVNA, because it is designed to dissipate heat through the metal case itself. When it reaches to a full operation, the device will preheat up to around 60°, which is considered a normal situation and the heat won't damage the device, but do pay attention to be temporarily away from the LibreVNA and avoiding the direct touch when it is heaten up, the heat will disappear in several minutes.
  • [Full S-Parameters Measurements] In the Vector network analyzer operating mode, the VNA takes all 4 S-Parameters measurements. A source signal is generated and alternately applied to the RF ports. This incoming signal at both RF ports is measured, resulting in the four S-parameters S11&S21(when signal routes to Port 1), as well as S12&S22(when signal routes to Port 2)
  • [Upgraded Version IMPROVED FREQUENCY ALGORITHM] Measurement range 100KHz-6GHz (previous vna analyzers are around 10KHz-3GHz), Above 3GHz, the performance decreases with increasing frequency, and the port isolation is only 50dB at 6GHz. Below 1MHz, the performance decreases with decreasing frequency, and the effective dynamic decreases to 70dB at 100kHz
  • [3 In 1 Device] Although the VNA hardware is not designed to be used as spectrum analyzer and signal generator, the general hardware architecture of a spectrum analyzer and signal generator are similar enough to that of a VNA to implement basic spectrum measurements and output a CW signal, which might suffice if no other equipment is available. The main differences to a real spectrum analyzer and signal generator please refer to the product description
  • [Comparable to Lab-grade Nano VNA] The ultra-low noise power supply design and the use of 16bit ADC, together with the precision CNC's aluminum shielded housing, achieve up to 100dB of effective dynamics. [USB Based Full Dual-port Measurements] Using 3 ADCs to sample data simultaneously and using FPGAs for signal processing, Libre VNA handheld antenna Analyzer is capable of scanning over 10,000 points of full dual-port measurements in less than 1 second
Bestseller No. 8
Comet Original CAA-500 Mark II Standing Wave Analyzer 1.8-500MHz SWR & Impedance Simultaneously
  • Range: 1.8 – 500MHz (including 222MHz band). RF output level: 0dBm 1 mW. Measured SWR Range: Analog meter 1.0 – 6.0:1 , LCD display 1.0 – 9.9:1
  • Impedance measurements: 12.5-300 ohms. Reactance range: 0 – 500 Ohms (absolute value) 1.8 -190MHz. Battery indicator and selectable Auto-Power-Off timer
  • Operates up to 9 hours continuous using six AA Alkaline or NiMH cells (not included). or use an external 8-16VDC 200ma power source (DC cable included) Internal trickle charger option when using NiMH batteries
  • Size: 3.5 x 7.75 x 2.65 inches (overall)
  • Weight: 2lbs 2oz with alkaline batteries installed
Bestseller No. 9
RigExpert AA-35 Zoom HF Antenna Analyzer (60kHz - 35MHz)
  • Frequency range: 0.06 to 35 MHz
  • Measurement for 25, 50, 75 and 100-Ohm systems
  • SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
  • Connector type: UHF (SO-239)
  • Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)
Bestseller No. 10
AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HW V3.5 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8'' Touchscreen
  • This is a DIY product that provides perfect vector network measurement capabilities(without case)
  • The metal shield for tiny vector network analyzer is designed to reduce the external interference and improve the measurement accuracy
  • Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
  • The default firmware of AURSINC Nanovna main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring


How Do You Buy The Best Antenna Analyzer?


Do you get stressed out thinking about shopping for a great Antenna Analyzer? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Antenna Analyzer, which is why we have assembled a comprehensive list of the greatest Antenna Analyzer available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Antenna Analyzer that you consider buying. Your questions might include the following:

  • Is it worth buying an Antenna Analyzer?
  • What benefits are there with buying an Antenna Analyzer?
  • What factors deserve consideration when shopping for an effective Antenna Analyzer?
  • Why is it crucial to invest in any Antenna Analyzer, much less the best one?
  • Which Antenna Analyzer are good in the current market?
  • Where can you find information like this about Antenna Analyzer?

We’re convinced that you likely have far more questions than just these regarding Antenna Analyzer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Antenna Analyzer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Antenna Analyzer. Make sure that you are only using trustworthy and credible websites and sources.


We provide an Antenna Analyzer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Antenna Analyzer currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of Antenna Analyzer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Antenna Analyzer?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your Antenna Analyzer.
  5. Customer Ratings: Number ratings grade Antenna Analyzer objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Antenna Analyzer.
  7. Product Quality: You don’t always get what you pay for with an Antenna Analyzer, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an Antenna Analyzer is should be an indication of how long it will work out for you. .

We always remember that maintaining Antenna Analyzer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Antenna Analyzer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here . Or You can read more about us to see our vision.

Leave a Reply

Your email address will not be published.